Connection To The App; Link The Device To The App - Create Warm Clear IR Bedienungsanleitung

• The CREATE HOME app is available for Android and iOS (search for the app on Google Play
or the App Store or scan the QR code below). Depending on the provider, there may be costs
involved in downloading the app.
• This device allows you to operate the device through your home network. A prerequisite is a
permanent Wi-Fi connection to your router and the free CREATE HOME app.
• We recommend disconnecting the appliance from the power supply when you are away
from home to avoid inadvertent switching on while you are away.
1. Install the CREATE HOME app and create a user account.
2. Select the time zone and click to get the verification code.
3. Enter the verification code received.
4. Set a login password and log in with your account in the app.
5. Click on "Add device" (+) and then on the category corresponding to the heater.
6. Press and hold the mode selection button
blinking rapidly.
7. Click "Confirm" while the indicator light on the device flashes rapidly.
8. Enter the password of your Wi-Fi network and confirm.
9. While connecting, please make sure your router, mobile phone and device are as close
as possible. Afterwards, your heater will have been successfully added to your CREATE
HOME application.
LINK T HE D E V ICE TO T H E AP P
Fast connection
Turn on the bluetooth of your mobile phone, and then set it up by following the steps below.
1. Add a new product in the APP. Press "+" on the top right position, press "add device".
2. At the top select "search for devices". Select "Add"
3. Select a 2.4GHz WIFI Network and enter the password. Press "next".
4. Wait until it is connected and when you press "next", the application will show you your
new heater.
5. You can click to modify the product name.
6. Once inside the product tab you can use it to your liking.

CONNECTION TO THE APP

iPhone OS android OS
for 3 seconds. The Wi-Fi indicator starts
E NGLI SH 15