Maintenance And Cleaning - Create Warm Clear IR Bedienungsanleitung

Manual connection:
If you do not have bluetooth turned on, follow the steps below:
1. Add a new product in the APP. Press "+" in the upper right position, press "add device".
2. On the screen where all kinds of household appliances appear, select the "Small appli-
ance" tab and within this "Heater".
3. Select a 2.4GHz WIFI Network and enter the password. Press "next".
4. Wait until it is connected and when you press "next", the application will show you your
new heater.
5. You can click to modify the product name.
6. Once inside the product tab you can use it to your liking.
Note: Please note that by choosing P1/P2/P3 in the app, the unit will work with the settings
you have set directly from the heater.
If you set P3 manually on the unit and choose P3 on the app, the unit will work according to
the settings you have set from the device.
You can also choose to set it to your own requirements by selecting Smart Timer within
the app.
Warning! Always disconnect the power supply before cleaning the appliance.
• Use lukewarm water with a mild detergent and a damp cloth to clean the product. Dry it
with a clean cloth. Do not pour water on or inside the unit.
• To store your product out of season, we recommend using the original (or appropriately
sized) box. It is important to keep it in a dry and safe place.
• Do not allow water or other liquids to get inside the product, as this could create a fire and/
or electric shock.
• We also recommend periodic cleaning of this appliance by lightly passing a vacuum clean-
er nozzle over the guards to remove any dust or dirt that may have accumulated in or on
the unit.
CAUTION: Do not use strong detergents, chemical cleaners, or solvents, as they may damage
the surface finish of plastic components.
16 E NGL I SH

MAINTENANCE AND CLEANING