Technical Specifications - eQ-3 homematic IP HmIP-PDT-CH Installations- Und Bedienungsanleitung

Technical specifications

12 Technical specifications
Device short description:
Supply voltage:
Current consumption:
Minimum load:
Maximum switching capacity:
Standby power consumption:
Dimming method:
Kind of load:
Switch type:
Operating mode:
Withstand voltage:
Degree of protection:
Protection class:
Device protection (not
interchangeable):
Pollution degree:
Temperature of ball pressure
test:
Temperature of glow wire
test:
Ambient temperature:
Dimensions (W x H x D):
Weight:
Radio frequency band:
Maximum radiated power:
Receiver category:
Typ. open area RF range:
Duty cycle:
Subject to technical changes.
30
HmIP-PDT-CH
230 V/50 Hz
0.35 A
3 VA
80 VA
0.4 W
Reverse phase control
Ohmic and capacitive lamp load
Independently mounted switch
S1
2500 V
IP20
I
Fuse protection for overloads and over-
temperatures
2
125 °C
850 °C
-10 to 35 °C
70 x 70 x 39 mm (not incl. mains plug)
138 g
868.0-868.6 MHz
869.4-869.65 MHz
10 dBm
SRD category 2
170 m
< 1 % per h/< 10 % per h