Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• Unplug the product or switch
off the fuse before repair,
maintenance and cleaning.
• Plug the product into an outlet
that meets the voltage and fre-
quency values specified on the
type label.
• (If your product does not have
a mains cable) only use the
connecting cable described in
the "Technical specifications"
section.
• Do not jam the power cable un-
der and behind the product. Do
not put a heavy object on the
power cable. The power cable
should not be bent, crushed,
and come into contact with
any heat source.
• Make sure that the power
cable is not jammed while put-
ting the product to its place
after assembly or cleaning.
• The rear surface of the oven
gets hot when it is in use. The
power cables must not touch
the rear surface of the product.
Otherwise it might get dam-
aged.
• Do not jam the electric cables
into the oven door and do not
pass them over hot surfaces.
Otherwise, cable insulation
may melt and cause fire as a
result of short circuit.
• Use original cable only. Do not
use cut or damaged cables.
• Do not use an extension cord
or multi-plug to operate your
product.
• Contact the authorized service
centre or importer to use the
approved adapter in cases
where the use of a converter
adapter (for plug type) is ne-
cessary.
• Contact the importer or the au-
thorized service centre if the
length of the power line is in-
adequate.
• Portable power sources or
multiple plugs may overheat
and catch fire. Keep multiple
plugs and portable power
sources away from the
product.
• If the power cable is damaged,
it must be replaced by the
manufacturer, an authorized
service or a person to be spe-
cified by the importer company
in order to prevent possible
dangers.
• CAUTION: Before replacing
the oven lamp, be sure to dis-
connect the product from the
mains supply to avoid the risk
of electric shock. Unplug the
product or turn off the fuse
from the fuse box.
If your product has a power
cable and plug:
EN / 6
EN
DE
Werbung
