English
1
Introduction
1.1 Information on this manual
This document is the current version of the
installation instruction at the time of pub-
lication. Please note the relevant version
and date.
This document is part of the unit. Read the
manual prior to installation. The manual is
there to ensure that you use the unit safely
and install it properly.
The illustrations in this manual are ex-
amples only and may differ from the unit.
This manual applies to UltraVent condens-
ation hoods for the units:
LMZx: iCombi Pro 6-2/3
n
Storage
Keep the installation manual and operating
instructions close to the unit. The installa-
tion manual must be accessible for profes-
sionals authorised by the manufacturer at
any time during service calls.
Distribution
This installation manual must be passed on
to the owner of the unit.
1.2 Target group
This document is intended for skilled
n
technicians, who have been certified
by the manufacturer after attending
training and safety instructions.
Installation, inspection, maintenance,
n
and repair work must only be carried
out by trained technicians.
It is recommended that only techni-
n
cians authorised by the manufacturer
perform inspection, maintenance and
repair work.
14 / 136
The unit may not be used, cleaned, or
n
maintained by children. The unit may
not be used for play. This is prohibited
even under supervision.
The unit may not be used, cleaned, or
n
maintained by people with limited
physical, sensory, or mental capacity or
those without the necessary experi-
ence or knowledge, unless such people
are supervised by a person who is re-
sponsible for their safety and who has
been informed of the hazards of the
unit.
In order to prevent accidents or dam-
n
age, the manufacturer recommends
that technicians attend training and
safety instructions.
1.3 Copyrights
Forwarding product-specific information
to third parties is prohibited. We reserve
the right to make technical developments
and changes in the interest of progress. All
rights, including to translation and duplica-
tion, are reserved.
1.4 Conformity
Unit conformity refers to the time of deliv-
ery. The operator is responsible for ensur-
ing extended conformity following any ex-
pansions, modification and connection of
additional functions.
The electricity connection has been
n
constructed and tested according to
IEC 60335 in consideration of EN
60335 and VDE 0700.
The unit is approved for use at alti-
n
tudes up to 4,000 m pursuant to IEC
60335.
The standards specified here apply to Ger-
many.
80.51.574_iCombiPro-iCombiClassic_UV-XS_IM_EU-west
1 | Introduction