Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Ejoy FD
| Electric wheelchair
Ejoy FD XL
| Electric wheelchair
Ejoy FD XXL
| Electric wheelchair
Button for speed level adjustment
Use this button (E) to adjust the speed level of the wheelchair, if the at-
tendant control unit is activated. By pressing this button, the maximum
speed of the relevant drive speed will be increased by one level, until
you reach level 5. Pressing again will reset the speed back to level 1. If
the control unit is programmed for operation with drive profiles, only
the speed level within the selected profile will be adjusted using the
button for speed level adjustment of the positioning system.
4.5. Locking and unlocking
of the wheelchair
The VR2 control system can be locked to prevent unauthorised use.
The locking method is by a sequence of button presses and joystick
movements as described below.
To lock the wheelchair
- With the control system switched on, press and hold the on/off
button.
- After 1 second, the control system will beep. Now release the on/
off button.
- Move the joystick forward until the control system beeps.
- Move the joystick backwards until the control system beeps.
- Release the joystick, you will hear a long beep.
- The wheelchair is now locked.
To unlock the wheelchair;
- Switch on the control system with the on/off button. The maximum
speed/profile display moves up and down.
- Move the joystick forward until the control system beeps.
- Move the joystick backwards until the control system beeps.
- Release the joystick, you will hear a long beep.
- The wheelchair is now unlocked.
92
Electric wheelchair |
Electric wheelchair |
4.6. Functional description of the
R-NET control unit
Bischoff & Bischoff GmbH - 2023 - 09 - 12 - Revision: 4
Ejoy FD
Electric wheelchair |
Ejoy FD XL
Ejoy FD XXL
43.
44.
93
Werbung
