Operation; Operating Buttons; Menu Structure; Operation Without External Control - EuroLite LED FE-2000 Bedienungsanleitung

The built-in control panel of the unit features four operating buttons and a display which shows all operation
statuses. After connecting the unit to the mains it requires a short initialization process and is then ready for
operation. The display shortly indicates the firmware version followed by the last operating mode. The operating
modes can be selected by means of the display and the control buttons. If inputs, such as program selection or
running speed are not confirmed within about 4 seconds by pressing the ENTER button, the previously selected
mode, or the previously set value is automatically activated. All settings remain stored even if the device is
disconnected from the mains.

Operating buttons

MODE
ENTER
UP
DOWN

Menu structure

Automatic Mode

Operation without external control

In automatic mode, 7 show programs are available that run at an adjustable speed or sound-controlled via the
built-in microphone if desired.
No. Description
0 Laser + color LEDs + white strobe LEDs
1 Laser + color LEDs
2 Laser + white strobe LEDs
3 Color LEDs + white strobe LEDs
4 Color LEDs
5 Laser
6 White strobe LEDs

OPERATION

Selects the operating mode or returns to the initial screen.
Activates a value to be modified or saves a value when modifying.
Selects the next menu item or increases values when modifying.
Selects the previous menu item or decreases values when modifying.
Running Speed Sound Control
MODE
Slave Mode
MODE
22 • EN
DMX Mode/
Start Address
MODE