Gloria Hobby exclusiv Originalbetriebsanleitung Seite 10

262_GB.qxd:262_GB.qxd
G For spraying press down the opera-
tion lever at the valve body. When
GB
releasing the lever the output will be
interrupted.
Information card
G Fig. I: Fill in the information card to
document the date of filling and type
of spraying agent.
Emptying and Service
G Any residual pressure in the tank
can be vented by lifting up the knob
on the safety valve. The safety / pres-
sure relief valve can only be actuated
with the device standing upright.
G The pomp will be carefully, at first
only a few turns by lefthand rotation
screwed off, so that the compressed
air being still in the tank can deflate.
G After use clear apparatus carefully
and dry it in open state.
G The working life will be extended
when greasing the washers and col-
lars sometimes. Only use resin- and
acid-free grease.
G The use of GLORlA cleaning
agent for sprayers, Item No.
1100.0000, is recommended in
order to achieve an optimum
cleaning of the sprayers and
safe neutralisation of the spray
remnants and residues.
G Important! Above-average use due to
manner of operating (including the tran-
12.03.2015 15:37 Uhr
port to the place of operation and the
storage when not using the sprayer), in-
fluences of the surroundings (of the
place of operation and the storage
place), inadequate maintenance and
care may lead to an early wear of the
sprayer. Therefore, the sprayer should
be checked for secure and serviceable
state before use., it should at least be
checked for externally visible damages.
Expecially when there occure damages
which endager the security, at least
however after 5 years, the sprayer
should specially be examined by one of
the manufacturer's service stations.
Declaration of conformity for one
group of components in the sense
of Art. 3, § 2 of the guide line for
pressure sprayers 97/23/EG
Gloria
Haus- und Gartengeräte GmbH
Postfach 31 61
D-58422 Witten
We herewith confirm that those parts
exposed to pressure
Typ hobby exclusiv Art.-No. 262....
comply with the directive 97/23/EG,
Art. 3, § 3.
Witten, 10.03.15
Ludger Strunk
Design Manager
14
Seite 14