Display Lock; Memory Function; Standby Mode - Levoit Smart True HEPA Bedienungsanleitung

USING YOUR SMART AIR PURIFIER (CONT.)

Display Lock

When the air purifier is on, you can lock
the display to prevent settings from being
accidentally changed. Buttons will not respond
to being tapped.
1. Press and hold
the display. The Display Lock Indicator
will light up above the
Note: If the display is turned off, the Display Lock
Indicator will flash 3 times to show that the display
has been locked, then turn off.
2. The Display Lock Indicator will blink when
any other button is tapped to indicate
that Display Lock is on.
3. Press and hold
to unlock the display. The Display Lock
Indicator will turn off.

Standby Mode

The air purifier is in Standby Mode when it is
turned off, but plugged in.
Note:
•
In Standby Mode, the infrared dust
sensor will still detect the surrounding
air quality and give you updates in the
VeSync app.
•
Display Lock (available in the VeSync
app) can be used while the air purifier
is in Standby Mode to keep the air
purifier from being turned back on.
for 3 seconds to lock
button.
again for 3 seconds

Memory Function

When the air purifier is turned off and
unplugged, it will remember its previous fan
speed, Sleep Mode, Auto Mode, Pet Mode,
and in-app Display and Light Detection
settings.
Note: The air purifier will not remember timers.
EN
13