Setting Up Your New Scooter - SoFlow SO ONE Bedienungsanleitung

1.2.

Setting up your new Scooter

Your new SoFlow scooter has been thoroughly checked and part-assembled by our
technicians.
It's almost ready to ride – just follow these simple set-up instructions and you'll be ready
to go!
Watch the SOFLOW video on
setting up your e-scooter.
2. Secure the latch
Pull down the latch mechanism until it clips
securely.
Warning!
Do not ride the scooter if the latch is loose.
copyright by www.soflow.com
1. Raise the stem
Remove the protective packaging but do
not lift the scooter out of the cardboard
frame just yet.
Lift the stem until it clips upright into the
frame.
3. Assemble the handle bar
Connect the cables between handlebar and
frontbar.
Place the console into the top of the stem.
Make sure that the contact poles between
the handlebar and the frontbar are well
interlocked.
Once the console is attached, use the Allen
wrench to tighten all four screws.
5/52