Avigilon 1.0MP-HD-H264-B1 Bedienungsanleitung Seite 13

Verfügbare Sprachen

Check that the Connection Status LED indicates the

correct state.

For more information, see LED Indicators.

Assigning an IP Address

The camera automatically obtains an IP address by default. Once

connected to a network, it attempts to locate and obtain an IP address

from a DHCP server. If this fails, Zero Configuration Networking

(Zeroconf) is used to choose an IP address. When the IP address is

set using Zeroconf, the IP address is in the 169.254.0.0/16 subnet.

The IP address settings can be changed using one of the following

methods:

•

(Recommended) Avigilon Camera Installation Tool

software application.

•

Camera's web browser interface:

http://<camera IP address>/

•

ARP/Ping method. For more information, see Setting the

IP Address through the ARP/Ping Method.

•

Network Video Management software application (for

example, Avigilon Control Center).

NOTE: The default camera username is admin and the default

password is admin.

Accessing the Live Video Stream

Live video stream can be viewed using one of the following methods:

•