Quick Reference Guide; Preparing The Devices For Use; Model: 21499 Walimex Pro Led Ringlight 380 Bi Color Rll-380Bv; Modell:21500 Walimex Pro Led Ringleuchte 500 Bi Color Rll-500Bv - Walimex Pro LED Ringleuchte 380 Bi Color Gebrauchsanleitung

Operating Instruction

5. Quick reference guide

1. Please install the L shape camera
6. Preparing the device for use / mounting on a stand
bracket with bracket adjustment
7. Power supply
knob on the light.
8. Operating the device
10. Troubleshooting
NOTE
2. Install the light on light stand.
Detailed instructions for the following activities can be found in the relevant sec-
tions of these instructions for use. Strictly follow the sequence of the following
activities during first time use, to prevent damage to the device.
WARNING
3. Install the camera onto the camera
With any action you take you should pay attention to the safety notes in
bracket and tighten with the bracket and tighten with the
the corresponding paragraphs.
camera fixing knob.

6. Preparing the devices for use

6.1 Model: 21499 walimex pro LED ringlight 380 Bi Color RLL-380BV

1. Install the L shape light holder
4. Make sure the power switch is OFF bracket (3) with bracket adjustment
knob (6) on the light.
before connecting the power cable
2. Install the light with the stand holder
(14) on a 1/4 or 3/8 inch thread on
or batteries.
a suitable lamp stand.
3. Install the camera onto the camera
bracket (3) and tighten with the
camera fixing screw (2).
4. C heck the secure fixation of all
screws.
5. The ringlight is ready for use.
32
page 30
page 32
page 33
page 35
height.
Operating Instruction
2. Put the remaining part of the
camera bracket into L shape
1. Please install the L shape camera
bracket and tighten the bracket
bracket with bracket adjustment
fixing knob.
knob on the light at the same
height.
3. Install the light on light stand.

6.2 Modell:21500 walimex pro LED Ringleuchte 500 Bi Color RLL-500BV

1. Install the L shape light holder
2. Put the remaining part of the
4. Install the camera onto the camera
bracket (3) with bracket adjustment
camera bracket into L shape
bracket and tighten with the
knob (6) on the light at the same
bracket and tighten the bracket
height.
camera fixing knob.
2. Put the remaining part of the hori- fixing knob.
zontal camera rail (15) into L shape
bracket (3) and tighten the bracket 5. Make sure the power switch is OFF
3. Install the light on light stand.
fixing screws and adapter (16).
before connecting the power cable
3. Install the camera onto the camera
or batteries.
bracket (3) and tighten with the
4. Install the camera onto the camera
camera fixing screw (2).
bracket and tighten with the
4. C heck the secure fixation of all
camera fixing knob.
screws.
5. The ringlight is ready for use.
5. Make sure the power switch is OFF
NOTE
before connecting the power cable
or batteries.
Please follow the user information issued by the tripod manufacturer.
WARNING
Only mount the device on a tripod that has been designed for the weight and
dimensions of the device. See technical specifications.
Make sure that the tripod with the mounted device is safe against tipping over or
slipping.
NOTE
When using the horizontal camera mounting rail, be careful not to lose the pla-
stic adapter rings of the mounting screws (16). The adapter rings are not tightly
connected to the screw and can therefore easily be lost. Without these adapter
rings, the camera housing can not be secured to the L-shaped lamp holder!
33