Setting Color Temperature; Setting Light Sectors; Transporting, Storing The Device; Troubleshooting - Walimex Pro LED Ringleuchte 380 Bi Color Gebrauchsanleitung

8.3 Setting color temperature

• Controlling the color temperature via color temperature wheel (13).
• Twist the knob down from 3000K and up to 5600K of color temperature.

8.4 Setting light sectors

Activate or deactivate the respective light sector by pressing the red buttons of the
light sector switches (10).
The status light of the corresponding LED (11) indicates the selection of the sector
If no sector is activated, the ring light does not shine.
• LED below the red button lights up - sector activated
• LED below the red button does not shine - sector inactive

9. Transporting, storing the device

WARNING
Danger of fire caused by hot parts of the equipment. Allow the device to cool
down completely.
• Switch off the device (See „Switching the device on, off)
• Allow the device to cool down completely
• Unplug the power supply cable from the device
• If necessary clean the device (See „Cleaning the device")
• Lay the device and all disassembled elements into the original article packaging
box and transport of store as specified in the technical specifications. See
technical specifications.
36

10. Troubleshooting

Problem Possible cause
Mains cable not plugged in
The device is
or not plugged in correctly.
switched on, but
does not show any
Power packs are almost
function.
exhausted
The device is switched off
The device has not enough
power
The illuminant
No light sector selected
does not light
The device is defective

11. Maintaining the device and cleaning

WARNING
Danger of electric shock and danger of fire due to short circuit.
Have the device repaired by an electrician immediately.
WARNING
Danger of cutting and splintering caused by breaking or bursting illuminants.
Cleaning
WARNING
Danger of electric shock
■ Do not bring the device into contact with moisture or water.
■ Always pull out the power supply plug before starting to clean the device.
Remedy
Plug the mains cable in
correctly
Charge the power packs
Switch on the device
Increase the power of the
dimmer control
Set minimum 1 light sector
Repairs must only be
carried out by a skilled
electrician
37