Toro 75500 Bedienungsanleitung Seite 23

1. If using a trailer, connect it to the towing vehicle
and connect the safety chains.
2. If applicable, connect the trailer brakes and
lights.
3. Lower the ramp, ensuring that the angle
between the ramp and the ground does not
exceed 12 degrees
4. Back the machine up the ramp.
Figure 15
1. Back the machine up the
ramp.
5. Shut off the machine, remove the key, and
engage the parking brake.
6. Tie down the machine at the front and rear axles
with straps, chains, cable, or ropes. Refer to
local regulations for tie-down requirements.
Figure 16
1. Tie-down points
Unloading the Machine
1. Lower the ramp, ensuring that the angle
between the ramp and the ground does not
exceed 12 degrees
2. Drive the machine forward down the ramp
(Figure 15).
(Figure 14).
2. Drive the machine forward
down the ramp.
(Figure 14).
Moving a Non-Functioning
Machine
The machine alerts you when the battery charge is
low so that you have enough power to return it to the
charging location; refer to
(page 14).
If you need to tow the machine, disengage the parking
brake and tow the machine at a walking speed.
g028294
g343282
21
Battery-Discharge Indicator