Toro 75500 Bedienungsanleitung Seite 16

Blade-Control Switch (Power
Takeoff)
The blade-control switch, represented by a
power-takeoff (PTO) symbol, engages and
disengages power to the mower blades.
Brake Pedal
Use the brake pedal to stop or slow the machine.
Parking-Brake Lever
Whenever you shut off the machine, engage the
parking brake to prevent accidental movement of the
machine.
•
To engage the parking brake, pull the parking-brake
lever up.
1. Engage the parking brake. 2. Disengage the parking
•
To disengage the parking brake, press the button
on the parking-brake lever and then push the
parking-brake lever forward
Traction-Control Pedal
Use the traction-control pedal to vary the ground
speed of the machine. The farther you press the
pedal, the faster the machine moves.
Drive-Mode Switch
The drive-mode switch has 3 positions: F
N , and R
EUTRAL EVERSE
be in the F position before engaging the
ORWARD
mower blades.
Note:
An audible alarm sounds when the drive-mode
switch is in the R
EVERSE
in reverse at half the forward speed.
Figure 7
brake.
ORWARD
. The drive-mode switch must
position. The machine moves
Reverse-Mowing Operation (RMO)
Button
Use the reverse-mowing operation (RMO) button to
operate the mower blades while driving the machine
in reverse.
Engage the reverse-mowing mode in the following
ways:
•
Before engaging the blades
– Press the reverse-mowing button, engage
the mower blades, then move the drive-mode
switch to the R
– Engage the mower blades, press the
reverse-mowing button, then move the
drive-mode switch to the R
•
While mowing in the forward direction
– Press the reverse-mowing button, then move
the drive-mode switch to the R
– Move the drive-mode switch to the R
position, disengage the mower blades, press
the reverse-mowing button, then engage the
mower blades.
Cruise-Control Operation (CCO)
Button
Use the cruise-control (CCO) button to maintain the
g341485
traction speed without your foot on the pedal.
Press the traction-control pedal to the desired
speed, hold the cruise-control button approximately 3
seconds, then release your foot from the pedal.
Press the traction-control pedal or brake pedal to
disengage the cruise control.
Battery-Discharge Indicator
The battery-discharge indicator displays the remaining
charge in the batteries. When the batteries are fully
charged, 10 indicator bars light up and disappear
as you use the charge. When the battery charge is
low, the indicator lights display in red and the mower
blades automatically disengage; charge the batteries
when this occurs.
,
Note:
The battery-discharge indicator does not
display unless the operator is sitting in the operator's
seat.
14
position.
EVERSE
position.
EVERSE
EVERSE
EVERSE
position.