Toro 75500 Bedienungsanleitung Seite 10

help. Liquid ejected from the battery may cause
irritation or burns.
•
Refer to an authorized Toro distributor to service
or replace a battery.
Training
Never allow children or untrained people to operate
or charge the machine. Local regulations may restrict
the age of the operator. The owner is responsible for
training all operators and mechanics.
Preparation
•
Keep bystanders and children away while
charging.
•
Shut off the machine and wait until the machine
has completely powered down before charging.
Failure to do this may cause arcing.
•
Read and follow all precautions for charging.
•
Use only a power cord approved by Toro.
Operation
•
Read and understand the charging instructions
before charging the batteries. Also, take the
following precautions when charging the batteries:
– Turn off the machine before connecting the
charger to a power source.
– Use only the battery charger supplied with the
machine to charge the batteries.
– Charge the battery in an open, well-ventilated
area, away from sparks and flames. Unplug
the charger before connecting or disconnecting
the battery. Wear protective clothing and use
insulated tools.
– Do not charge a damaged or frozen battery.
– Always unplug the power cord from the power
outlet before unplugging it from the machine
charging receptacle to avoid sparks.
– If a battery gets hot while charging, begins
emitting large amounts of gasses, or spews
electrolyte, immediately disconnect the charger
power cord from the power outlet. Have the
machine serviced by an Authorized Service
Dealer before using it again.
•
Do not abuse the power supply cord or yank on
it to disconnect the charger from the receptacle.
Keep the cord from heat, oil, and sharp edges.
•
Connect the charger directly to a grounding
receptacle. Do not charge on an ungrounded
outlet, even with an adaptor.
•
Do not alter the provided power cord or plug.
•
Use an appropriate extension cord.
•
If the power supply cord is damaged while it
is plugged in, disconnect the cord from the
wall receptacle and contact an authorized Toro
distributor for a replacement.
•
Unplug the charger from the electrical outlet when
not in use, before moving it to another location, or
prior to servicing it.
Maintenance and Storage
•
Unplug the power cord from the outlet before
starting any maintenance or cleaning to reduce
risk of electric shock.
•
Do not charge the batteries while servicing the
machine.
•
When removing or installing the batteries, do not
allow the battery terminals to touch any metal
parts of the machine.
•
Always keep the battery retainers in place to
protect and secure the batteries.
•
If the charger or power cord is damaged, do not
use it; take it to an authorized Toro distributor.
•
To reduce the potential for fire, keep the batteries
and motor area free of excessive grease, grass,
leaves, and accumulation of dirt.
•
Do not charge with a damaged cord or plug.
Replace a damaged cord or plug immediately.
•
Maintain or replace safety and instruction labels
as needed.
•
Store the machine indoors in a dry, secure place
that is out of the reach of unauthorized users.
Maintenance Safety
•
If you leave the key in the switch, someone could
accidently start the machine and seriously injure
you or other bystanders. Remove the key from the
switch before you perform any maintenance.
•
Before you leave the operator's position, do the
following:
– Park the machine on a level surface.
– Disengage the drives.
– Engage the parking brake.
– Shut off the machine and remove the key.
– Allow machine components to cool before
performing maintenance.
•
Do not allow untrained personnel to service the
machine.
•
Carefully release pressure from components with
stored energy.
•
Check the parking brake operation frequently.
Adjust and service it as required.
•
Never tamper with safety devices. Check their
proper operation regularly.
8