Overload Warning - Kern Rfe Betriebsanleitung

 After removing the weighing container, the weight of the weighing container
appears in the field of the weight display as negative value.
 To delete the tare value, remove load from weighing plate and press
In all fields now will again be displayed 0.
9.3.1 Pre-Tare
It is possible to place a known tare weight in the balance in advance. There are two
possibilities for this:
• Long key press on
keys
• If articles are stored via PLU, the current tare value is also stored.
Note: A price must be entered, or the price can also have the value "0".

9.4 Overload warning

Overloading exceeding the stated maximum load (max) of the balance, minus a
possibly existing tare load, must be strictly avoided. This could cause damage to
the balance.
Exceeding maximum load is indicated by the display of "-oL-", and an audio
sound. Unload balance or reduce preload.
24
. The pretare value can be entered using the numeric
.
RFE-BA-e-2012