Adjustment Switch And Seals; Checking The Balance Verification Settings - Kern Rfe Betriebsanleitung

7.8.1

Adjustment switch and seals

7.9 Checking the balance verification settings

For the adjustment, the balance must be switched over to service mode.
In calibrated scales the service mode is locked individually for each switch. To
disable the access lock, destroy the seal and actuate the switch.
Attention:
After destruction of the seal the balance must be re-verified by an authorised agency
and a new verification wire/seal mark fitted before it can be reused for applications
subject to verification.
18
1. Seal mark
2. Cover
3. Verification switch
RFE-BA-e-2012