OHAUS Pioneer PA64 Bedienungsanleitung Seite 3

EN-1
1. INTRODUCTION
1.1 Safety Precautions
Please follow these safety precautions:
• Verify that the AC Adapter input voltage matches the local AC power supply.
• Use the balance only in dry locations.
• Do not operate the balance in hostile environments.
• Do not drop loads on the platform.
• Do not place the balance upside down on the platform or platform mounting cone.
• Service should be performed only by authorized personnel.
1.2 Controls
Button: Functions:
O/T - On Short Press:
Off Long Press:
Yes Short press (Menu):
Unit Short Press:
Menu Long Press:
No Short press (Menu):
Long press (Menu):
Print Short Press:
Cal Long Press:
2. INSTALLATION
2.1 Package Contents
0.1g and 0.01g Models
Instruction Manual
Power Adapter
Balance
Pan
Pan Support
Wind-Ring (InCal models only)
Warranty Card
No
0.001g and 0.0001g Models
Instruction Manual
Power Adapter
Balance
Pan
Glass Doors and Panels
Warranty Card
Yes
Turns balance on, sets display to zero
Turns balance off
Selects or accepts setting
Steps through active units and modes
Enters Menu
Steps through available settings
Exit menu or abort out of menu item
Sends data
Initiates Span Calibration
Pioneer
™