Kärcher HD 5/13 Classic Bedienungsanleitung Seite 10

Dokumentationsbevollmächtigter:
S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, /03/01
Contents
General notes ......................................................
Intended use........................................................
Environmental protection.....................................
Scope of delivery .................................................
Safety instructions ...............................................
Safety devices .....................................................
Symbols on the device ........................................
Description of the device .....................................
Initial startup ........................................................
Operation.............................................................
Interrupting operation ..........................................
Finishing operation ..............................................
Frost protection ...................................................
Storage................................................................
Care and service .................................................
Troubleshooting guide .........................................
Accessories and spare parts ...............................
Warranty ..............................................................
Technical data .....................................................
EU Declaration of Conformity ..............................
General notes
Read these original operating instruc-
tions and the enclosed safety instruc-
tions before using the device for the first
time. Proceed accordingly.
Keep both books for future reference or for future own-
ers.
Intended use
Use this high-pressure cleaner only for the following
types of work:
Use the high-pressure jet for cleaning machines, vehi-
cles, buildings, tools and similar objects.
We recommend using a rotary nozzle as a special ac-
cessory for stubborn soiling.
The HD...Plus is supplied with a rotary nozzle.
ATTENTION
Dirty water leads to premature wear or deposits in
the device.
Clean the device using only clean water, or recycled wa-
ter that does not exceed the following limits:
● pH value: 6.5...9.5
● Electrical conductivity: Conductivity of fresh water
+ 1200 µS/cm, maximum conductivity 2000 µS/cm
● Settleable particles (sample volume 1 l, settling time
30 minutes): < 0.5 mg/l
● Filterable particles: < 50 mg/l, no abrasive sub-
stances
● Hydrocarbons: < 20 mg/l
● Chloride: < 300 mg/l
● Sulphate: < 240 mg/l
● Calcium: < 200 mg/l
● Total hardness: < 28 °dH, < 50° TH, < 500 ppm (mg
CaCO /l)
3
● Iron: < 0.5 mg/l
● Manganese: < 0.05 mg/l
● Copper: < 2 mg/l
● Active chloride: < 0.3 mg/l
● Free of unpleasant odours
Environmental protection
The packing materials can be recycled. Please
dispose of packaging in accordance with the en-
9
vironmental regulations.
9
Electrical and electronic devices contain valua-
9
ble, recyclable materials and often components
9
such as batteries, rechargeable batteries or oil,
9 which - if handled or disposed of incorrectly - can
pose a potential danger to human health and the envi-
9
ronment. However, these components are required for
10
the correct operation of the device. Devices marked by
10
this symbol are not allowed to be disposed of together
10
with the household rubbish.
11
Notes on the content materials (REACH)
11
Current information on content materials can be found
11
at: www.kaercher.de/REACH
11
Scope of delivery
11
11 Check the contents for completeness when unpacking.
If any accessories are missing or in the event of any
12
shipping damage, please notify your dealer.
12
12
Safety instructions
12
● It is essential that you read the safety instructions
13
5.951-949.0 before initial start-up.
● Observe the national regulations for liquid jet clean-
ers.
● Observe the national accident prevention regula-
tions. Liquid jet cleaners must be tested regularly.
The test result must be recorded in writing.
● Do not modify the device or accessories.
CAUTION
Missing or modified safety devices
Safety devices are provided for your own protection.
Never modify or bypass safety devices.
The safety lever on the high-pressure gun prevents the
device from being switched on inadvertently.
If the high-pressure gun is closed, the overflow valve
opens and the entire water volume will flow back to the
pump suction side.
The overflow valve is set by the manufacturer and
sealed. Setting shall only be carried out by Customer
Service.
English
Safety devices
Safety lever
Overflow valve
9