2. Safety
WARNING!
Residual media in dismounted instruments can result in a risk to persons, the
environment and equipment.
▶
Take sufficient precautionary measures.
2.6 Labelling / Safety marks
Dial
ATEX marking:
II 2G c IIC TX X
II 2D c TX X
Serial number
The legibility of the marking must be observed during time in use but at least during inspec-
tion periods of three years. If any harm of the legibility is found please contact the manufac-
turer to renew the marking.
Product label
Model
Article number
Permissible ambient temperature
Date of manufacture (month/year)
The instrument bearing this mark is a safety pressure gauge with a solid baffle
wall in accordance with EN 837.
WIKA operating instructions pressure gauge, model 4 per ATEX
Before mounting and commissioning the instrument, ensure you
read the operating instructions!
EN
9