System; General; Firmware/Reset - Abus IPCA22500 Bedienungsanleitung

Enable daylight savings time:
NTP server synchronisation:
NTP server:
NTP update interval:
PC time synchronisation:
Manual:

10.4.5 System

10.4.5.1 General

Camera name:
Export configuration:
Import configuration:
Reset settings:
Include network:
Status LED:

10.4.5.2 Firmware/Reset

Current firmware:
Firmware online check:
Firmware update:
Restart:
Schedule restart:
by ticking the checkbox, you are confirming that the location
in which the camera is installed takes part in daylight savings
time.
Auto: the camera automatically uses the switch-over times
every year.
Manual: manual switch-over time settings.
tick the box for the camera to automatically obtain the date
and time from a server (please note: the NTP server does
not hold any information on the summer/winter time
changeover).
enter the domain name or the IP address of the time server
here.
update interval for the date and time with the server. An
update also takes place when the camera is restarted.
when you save, the date and time from the connected client
PC are adopted.
manual assignment of date and time
you can change the default camera name here. Up to a
maximum of 16 characters are permitted.
Permissible characters are: A-Z, a-z, 0-9
export the camera' s configuration data into a file
import the camera' s configuration data from a file
restore all settings to factory settings, except network
settings
after ticking the checkbox and performing the function for
resetting settings, all settings including the network
parameter are reset.
when the checkbox is ticked, the status LED on the camera
is active (except TVIP91100).
displays the firmware version currently installed
this function checks whether a new firmware version is
available on the ABUS website. If there is, the camera offers
to download the firmware on to the PC (download link). Then
the firmware must be manually installed using the firmware
update function.
a more recent version of the camera firmware can be
installed here. More information on firmware is available
on the ABUS website (www.abus.com).
manual camera restart
the camera can be restarted here at a specific frequency.
96