Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CONNECTIONS, OPERATING AND DISPLAY ELEMENTS
13
12
3
13
1
ON/OFF SWITCH
Push switch for switching the spotlight on and off.
2
OLED DISPLAY
The OLED display shows the currently activated mode (main display 1), spotlight status (main display 2 = W-DMX and battery status), the
menu items in the editing menu and the numerical value or operating mode in certain menu items. Switch between both main displays by
briefly pressing ENTER and DOWN at the same time. The editing menu is accessible only from main display 1. If there is no input for approx.
one minute, the display automatically returns to the main display. Note on the main display in DMX operating mode: As soon as the control
signal is interrupted, the characters in the display begin to flash. When there is a control signal again, the flashing stops. Briefly pressing UP
in the control panel when in the main display rotates the display by 180°.
3
TOUCH-SENSITIVE CONTROLS
MENU – Press MENU to access the editing menu. Press repeatedly to go back to the main display. Pressing MENU without confirming a
value or status change with ENTER restores the previously confirmed value or status.
ENTER – Press ENTER to access the menu levels to make value changes and to access the submenus with the ENTER control panel.
Confirm value or status changes by pressing ENTER.
UP and DOWN – select individual menu items in the selection menu (DMX address, operating mode etc.) and in the submenus. Allow chang-
es to the value in a menu item, such as the DMX address, as required.
Before changing device settings, ensure that the control panel is dry and clean, in order not to impair its functionality.
4
TILT
Knurled screw for the TILT feature for uplighting. Turn the screw outwards from the housing until you achieve the desired beam direction.
The screw features a mechanical stop mechanism to prevent it from being completely removed from the housing. In order to effectively use
the tilt function and achieve a more inconspicuous look, remove the mounting bracket by releasing the four screws A with a suitable tool.
5
RUBBER FEET
Five rubber feet ensure stability when the stand or mounting bracket are removed. Integrated magnets allow attachment to magnetic
surfaces. When attaching with the magnets, please ensure that the spotlight is not positioned in areas that people or animals may inhabit.
Also ensure that locally applicable safety regulations are met.
6
SECURING LUG
Securing lug for attaching the spotlight on truss installations. When installing on a truss, ensure that the mounting bracket is securely
attached to the spotlight housing with the four fixing screws A.
7
HANDWHEEL BOLTS
The two handle screws are used for adjusting and fixing the stand and/or mounting bracket.
8
STAND OR MOUNTING BRACKET
The stand or mounting bracket can be removed to achieve a more inconspicuous look when using the spotlight as an uplight.
6
13
11
3
2
13
5
7
A
1
6
5
8
10
9
5
A
5
5
4
7
Werbung
