Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SP/SPEED
Speed setting for the color change program in Auto Program (PG) operating mode. Select a color change program, press the SP button then
use the + and - buttons to set the desired speed from 000 to 100.
/ BRIGHTNESS
Pressing the button for setting brightness immediately activates the Static operating mode. The overall brightness can now be set using the
+ and - buttons (set value is show in display).
FL/FLASH (Strobe)
Pressing the button for setting the strobe immediately activates the Static operating mode. The strobe effect can now be set using the + and
- buttons. The strobe effect values correspond to those in channel 2 of the DMX table 3CH and channel 3 of tables 12CH1 and 19CH (the set
value is shown in the display).
R/G/B/W/A/UV (CW and WW without function)
Individual color mixtures can be created with the 6 buttons R, G, B, W, A and UV (static mode – static). Press the button for the desired LED
color and use the + and - buttons to set the brightness from 000 to 255 (the value is shown in the display).
Example: Set red and blue at maximum brightness, and green, white, amber and UV at minimum (i.e. off) to achieve a bright magenta color
blend.
PG (color change program)
Select the desired color change program 1–6 by repeatedly pressing the PG button and then set the brightness using the + and - buttons.
Press the SP (Speed) button and then use the + and - buttons to set the program speed (the program, brightness and running speed are
shown in the display).
CM (color presets)
Select the desired color preset by repeatedly pressing the CM button and then set the brightness using the + and - buttons (the color preset
and brightness are shown in the display).
SC (no function)
AU (no function)
DIFFUSERS, HALF DOME FILTER AND LENS HOOD
Two diffusers are supplied with the spotlight, each with a different beam angle (11°, 27°).
The beam angle of the spotlight can be set at 9° (without diffuser), 11°, or 27°. The four magnets in the diffusers, the half dome filter and
the lens hood as well as the four opposing magnets set into the spotlight housing are directly over each other and the accessory is securely
held in place. Because magnets are set into all four accessories, they can be combined with each other, whereby the half dome filter and
then the lens hood must be placed on top. The lens hood can be attached in four different positions.
13
Werbung
