Activate User Menu; Location - Mark PinTherm Mistral Technisches Handbuch

5.4 Activate user menu

MON
Default setting Menu
You can change the following settings in the menu:
– Change heating/cooling/night setting
– Change switching difference
– Enter/change switching times
– Change switch delay
– Change control settings cooling
– Change control settings heating
– Change water temperature
– Calibration
– Change time/date
– Vacation settings
– Change control system
– Change menu code
– Change language
– Modbus
– IP settings

5.5 Location

This menu displays the name of the specific "Location" that is being controlled (max. 16 characters).
The name of a "Location" can only be set via Ethernet (see 5.20) or Modbus (see 5.19).
08:01 °C
DAY
code
1000
LOCATION
select
ENTER MENU CODE
0000
changes the flashing
digit
to go one digit up
SET/CHANGE
PROGRAM
make your menu choice
with these buttons
leave the menu and go back
ESC
to the main screen
OK
back to
the menu
OK
EN
9