EINHELL HT 2020 F Bedienungsanleitung Seite 13

Anleitung HT 2020-12spr.
Using detergent
Fill the tank of the foam spray lance with
detergent (capacity approx. 0.5 l).
Set the nozzle to „flat jet" and attach the tank for
foam cleaning.
5d
M
Distribute the detergent delivered and mixed with
water.
Using the standard accessories
The high-pressure cleaner is fitted with a nozzle
head that allows you to regulate the jet from
concentrated to flat jet.
5e
The nozzle head also has a foam distributor tank
with a knob to regulate detergent intake.
06.11.2001 14:00 Uhr
Correct use of the rotating nozzle
(only for models with a rotating nozzle)
To enhance washing performance, use the rotating
nozzle supplied as follows:
Cleaning recommendations
Seite 13
Switch off the high-pressure cleaner.
Take off the regulating lance and attach the rotor
nozzle to the pistol handle.
Switch on the high-pressure cleaner again.
First release the dirt by spraying the dry surfaces
of the object to be cleaned with the flat jet. For
vertical surfaces, always work from bottom to
top.
Allow the detergent to take effect for 1-2 minutes,
but make sure it does not dry. Then clean using
the flat or high-pressure jet, starting at the
bottom and always at a distance of at least
30 cm.
Switch off the high-pressure cleaner.
Turn off the water tap.
Release any residual pressure in the pistol until
there is no water left in the adjustable nozzle
head.
Secure the pistol.
Remove the plug from the socket-outlet.
Before putting away the high-pressure cleaner
for the winter, rinse it out with a mild, non-toxic
antifreeze.
GB
13