Kärcher Air Blower AB 20 Ec Bedienungsanleitung Seite 8

WARNING
Injuries due to strong air streaming
The device creates strong air streaming at
the air exit, meaning that sucked-in objects
could be ejected at high speed.
Keep a safe distance from the air exit.
Note
Take suitable measures to avoid the device
moving around on smooth floors.
Note
When setting up the device, ensure that the
fan grilles are not blocked.
1. Open doors and windows as wide as
possible to improve ventilation.
Set up and align device
1. Set up and align device stably on level
ground.
2. Fold out the folding leg if needed.
Power switch
OFF Off
3 Maximum power
2 Medium power
1 Minimum power
Switching on the device
1. Connect the mains plug.
2. Switch on the device.
Drying
1. Carry out drying.
Switching off the device
1. Switch off the device.
2. Pull out the mains plug.
Transport
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during
transportation.
1. Wind the mains cable around the cable
storage.
2. Carry the device by the carrying handle.
3. When transporting the device in vehi-
cles, secure it to prevent it from slipping
or overturning in accordance with the re-
spective valid guidelines.
8
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during
storage.
The device may only be operated indoors.
Care and service
DANGER
Danger of electric shock
Injuries due to touching live parts
Switch off the device.
Remove the mains plug.
CAUTION
Device continues to run after switch-off
Risk of injury from blower continuing to run
Wait until the blower has come to a com-
plete standstill before performing mainte-
nance or repair work.
1. Check the fan grilles daily for soiling,
clean if necessary.
2. Regularly clean the device surface with
a moist cloth.
Troubleshooting guide
DANGER
Danger of electric shock
Injuries due to touching live parts
Switch off the device.
Remove the mains plug.
CAUTION
Device continues to run after switch-off
Risk of injury from blower continuing to run
Wait until the blower has come to a com-
plete standstill before performing mainte-
nance or repair work.
Blower does not run
1. Check the socket and the power supply
fuse.
2. Check the mains cable and the mains
plug of the device.
3. Switch on the device.
Customer Service department
If the malfunction cannot be corrected, the
device must be checked by the Customer
Service department.
English
Storage