HomeMatic IP HmIP-FAL24-TR Montage- Und Bedienungsanleitung Seite 24

Start-up
Contact an electrical installer!
*Specialist knowledge required for installation:
The following specialist knowledge is particularly important during
installation:
• The "5 safety rules" to be used: Disconnect from mains;
Safeguard from switching on again; Check that system is
deenergised; Earth and short circuit; Cover or cordon off
neighbouring live parts;
• Select suitable tool, measuring equipment and, if neces-
sary, personal safety equipment;
• Evaluation of measuring results;
• Selection of electrical installation material for safeguar-
ding shut-off conditions;
• IP protection types;
• Installation of electrical installation material;
• Type of supply network (TN system, IT system, TT sys-
tem) and the resulting connecting conditions (classical
zero balancing, protective earthing, required additional
measures etc.).
For secure operation, the device can be installed
in a power distribution panel according to VDE
0603, DIN 43871 (low-voltage sub-distribution
board), DIN 18015-x. The installation must be
made on a mounting rail (DIN rail) according to
EN50022. Installation and wiring have to be per-
formed according to VDE 0100 (VDE 0100-410,
VDE 0100-510 etc.). Please consider the techni-
cal connection requirements (TAB) of your ener-
gy supplier.
24