HomeMatic IP HmIP-FAL24-TR Montage- Und Bedienungsanleitung Seite 20

Hazard information
qualified electricians (to VDE 0100) are permitted
to carry out work on the 230 V mains. Applicable
accident prevention regulations must be com-
plied with whilst such work is being carried out.
To avoid electric shocks from the device, please
disconnect the mains voltage (trip the miniature
circuit-breaker). Non-compliance with the instal-
lation instructions can cause fire or introduce
other hazards.
Please take the technical data into account
before connecting a load. All load data relates to
ohmic loads. Do not exceed the capacity
specified for the device.
The device has not been designed to support
safety disconnection.
Exceeding this capacity could lead to the
destruction of the device, fires or electric shocks.
Before the actuator is connected, remove the
fuse from the fuse box or remove the plug from
the socket.
Observe the installation instructions for
installation in distribution systems (DIN VDE 0100-
410).
20