13.
Fitting the fly-by screen
The bracket for the screen is
connected through the frame eit-
her by using a locking plate or
by connection to the adaptor .
(Bolts DIN 912, M6 x 40, 5 mm
Allen key).
(The locking plates are only used
on desks without adaptors).
The organiser rail is clipped
into the tracks at the side of the
screen.
14.
Desk-mounted electrics
Slide the sockets and clamp
onto the desk. Only for 13mm
tops: insert the spacers . ighten
the grub screws from below
(DIN 913, M8 x 12,4mm Allen
key).
1
2
13
oder
3