Herunterladen Diese Seite drucken

Konig + Neurath LOGO.S Montageanleitung Seite 13

Höhenverstellbare tische

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

4.
Height adjustment
To adjust the desk height, loosen
the wing nut Œ slightly and press
inwards.
Adjustment is made at 10 mm inter-
vals, in the range 680-820 mm, as
indicated on the scale.
When the desk is at the desired
height, tighten the wing nut.
5.
Wire management
Attach the umbilical Œ using the
sprung clamp across the slot in
the cable tray, and run the cable
through the umbilical into the
tray.
The cable tray bracket  are
clamped to the frame. They are
used on desks without a sliding
top and on link desks.
The cable clips Ž are clipped
onto the frame from the side or
from below.
6.
Fitting a side extension
frame or a printer tray.
The extension frame Œ and the
printer tray  are fastened to the
frame of the main desk. The con-
nector Ž is locked into the slot in
the frame by a wing nut  from
below.
10

Werbung

loading