Werbung
Verfügbare Sprachen
Verfügbare Sprachen
9. Only use single-phase alternating current for the voltage specifi ed
on the power specifi cation label.
10. Do not expose the equipment to rain. Do not operate the equip-
ment in damp or wet conditions and/or in an environment where
there is a fi re or explosion risk
11. Never leave the equipment unattended while connected to the
mains supply.
12. Make sure that you use suitable extension cables.
13. Each time the tool is converted (e.g. to change the expander
heads, clamping jaw sets), the mains cable must be removed to
prevent the tool from being switched on accidentally.
14. To prevent the motor overheating, do not let the tool run for too
long at maximum pressure.
15. The tool weight is max. 26 kg. Depending on the installation
situation, we recommend two-man operation.
20
Caution!
REHAU does not assume any liability for damage or injury caused by
unsafe use of the product, inadequate maintenance or improper ap-
plication of the product or system. For planning and assembly, please
use our valid Technical Information! You can obtain the current version
of the document from your dealer or your REHAU Sales Offi ce, or you
can download it from www.rehau.de/com.
Werbung
