Eibenstock EHB 32/4.2 Originalbetriebsanleitung Seite 18

Switching on and off
Short-Time Operation
Switching-on: press the on/off switch
Switching-off: release the on/off switch
Permanent Operation
Switching-on: press the on/off switch and, keeping it pressed, engage the
lock-on button
Switching-off: press the on/off switch and release it again
Attention!
!
Only press the lock-on button when using a stand. In case
of every stop of the machine, the lock-on button has to be
released immediately by pressing the on/off switch.
Consequently, you can avoid an unintentional restart of the
machine (physical hazard).
Changing Gears
The machine is equipped with a mechanical four-speed gearbox. Select the
required speed by pressing-in, shifting and engaging. The position of the
lower speed is in direction of the working spindle. Change the speed only
when the machine is not running, and support the speed-changing by
slightly rotating the work spindle.
Speed
I
II
III
IV
18
EHB 32/4.2
110 rpm
175 rpm
245 rpm
385 rpm