ULTIMATE SPEED USB 12 A1 Bedienungs- Und Sicherheitshinweise Seite 28

Safety instructions for road safety / Start-up
Safety instructions for
road safety
In order not to jeopardise
road safety, observe the following
points:
· When using in vehicles, make sure that safety
devices, side airbags in particular, are not
compromised.
· If you have any question about the airbag,
read the vehicle's Owner's Manual or ask at
your local workshop.
AVOID DAMAGE TO THE
SEAT COVER!
Please ensure that you:
· connect the seat cover only to the voltage in-
dicated in the Technical Data,
· do not switch on the seat cover if it is folded
or bunched up,
· do not cause any sharp creases in the seat
cover,
· do not place any objects, e.g. suitcases or a
washing basket, on the seat cover when it is
switched on.
This can damage the seat cover.
Start-up
Attaching the seat cover
Place the seat cover on the car seat.
Pull the fastening strap
the head rest of the car seat.
Carefully attach the seat cover using faste-
ning straps
.
7a
28 GB
of the seat cover over
7b
7b
7a
Note: If your vehicle has a side airbag, ensure
when attaching the seat cover that the fastening
strap is pulled only over the frame of the hea-
7b
drest and not over the top part of the car seat.
7b
Switching on / off / Selecting
the fan speed
When using for the first time, first connect
the
12 V adapter
3
to the seat cover by attaching one of them to
the connection socket
Plug the mains adapter
or the 12 V adapter
in your car.
or the mains adapter
.
2
into a 230 V socket
4
into the 12 V connector
3
4