Parkside PFBS 12 B6 Originalbetriebsanleitung Seite 75

e) Maintain power tools. Check for misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the power tool's operation. If
damaged, have the power tool repaired before use. Many accidents are caused by
poorly maintained power tools .
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control .
g) Use the power tool, accessories and tool bits etc. in accordance with these instruc­
tions, taking into account the working conditions and the work to be performed. Use
of the power tool for operations different from those intended could result in a azardous
situation .
5 . Use and handling of the cordless electrical power tool
a) Charge a rechargeable battery unit using only the charger recommended by the
manufacturer. Chargers are often designed for a particular type of rechargeable
battery unit . There is the danger of fire if other types of rechargeable battery units are
used .
b) Only the rechargeable battery units supplied are to be used with an electrical
power tool. The use of other rechargeable battery units may lead to the danger of
injury or fire .
c) When they are not being used, store rechargeable battery units away from paper­
clips, coins, keys, nails, screws or other small metal objects that could cause the
contacts to be bridged. Short-circuiting the contacts of a rechargeable battery unit may
result in heat damage or fire .
d) Fluids may leak out of rechargeable battery units if they are misused. If this
happens, avoid contact with the fluid. If contact occurs, flush the affected area with
water. Seek additional medical help if any of the fluid gets into your eyes. Escaping
battery fluid may cause skin irritation or burns .
CAUTION! RISK OF EXPLOSION!
Never charge non-rechargeable batteries.
from continuous exposure to sunlight, fire, water and moisture. There is a risk of
explosion .
6 . Service
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained .
│ GB │ MT
■ 72
Protect the rechargeable battery from heat; for example,
PFBS 12 B6