Bosch GSS 230 AVE Originalbetriebsanleitung Seite 13

OBJ_BUCH-1665-001.book Page 13 Monday, July 9, 2012 11:08 AM
18 Sanding plate, extended*
19 Screws for extended sanding plate*
20 Triangular sanding sheet*
21 Triangular sanding plate, extended*
Technical Data
Orbital sander
Article number
Dust box included in delivery scope
Preselection of orbital stroke rate
Rated power input
No-load speed
No-load orbital stroke rate
Orbit diameter
Sanding sheet dimensions
— Adhesion via Velcro backing
— Attachment via clamping
Sanding plate dimensions
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Noise/Vibration Information
GSS ...
Typically the A-weighted noise levels of the product are
Sound pressure level
Sound power level
Uncertainty K=
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K determined according to
h
EN 60745:
a
h
K
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.
Bosch Power Tools
22 Extraction outlet
23 Vacuum hose*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
GSS ... 230 AVE
3 601 B92 8..
W
8 000
-1
min – 11000
16 000
-1
min – 22 000
mm
mm 93 x 185
mm 93 x 230
mm 92 x 182
kg
dB(A)
dB(A)
dB
2
m/s
2
m/s
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider Helmut Heinzelmann
Senior Vice President Head of Product Certification
Engineering PT/ETM9
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
11.05.2012
English | 13
280 AVE
3 601 B92 9..
300 350
8 000
– 11000
16 000
– 22 000
2.4 2.4
115 x 230
115 x 280
114 x 226
2.5 2.8
/II /II
230 AVE 280 AVE
80 86
91 97
3 3
2.5 2.5
1.5 1.5
2 609 932 841 | (9.7.12)