Makita DUP361 Betriebsanleitung Seite 19

The cord holder prevents the connection cord from
dangling around
also the
prevent the
being cut
►
Fig.17
►
Fig.18
NOTICE:
Do not hang anything other than the
connection code on the cord holder. Otherwise the
code holder
NOTICE:
Do not force the cord holder opening.
Otherwise it
deformation
breakage of
4. Put
on
slip
through
►
Fig.19: 1.
5. First, align the triangular marks of the
female socket of the connection cord with the triangular
mark of the male connector of the shears. Push in the
socket of the connection cord to the connector of the
shears. Then, align the marking on the coupling with the
trianglar marks, and push in and turn the coupling to
tighten.
►
Fig.20: 1. Triangular mark 2. Connection
cord
3. Shears 4. Marking on coupling
5. Coupling
NOTICE:
Turn the coupling and align the marking on
the
triangular marks
disconnecting
connection cable.
your body,
cord holder
connection cord
by mistake.
may be
may result
or
the code holder.
the arm
your arm.
the connection cord
the arm
Arm
coupling with
first
the
and
can
from
broken.
in
band
And
band.
band
the
when
19 ENGLISH