Werbung
Verfügbare Sprachen
Verfügbare Sprachen
oPerATIoN
Cleaning, care and maintenance
5. Cleaning, care and
maintenance
Filter change
Filter
Filter class
FMs G3-5 LA 60 Iso Coarse > 45 % (G3) 5
Clean the filter at least every 3 months. If the filter is very dirty,
clean it at shorter intervals.
f switch off the power supply to the appliance via the fuse/
MCB in the distribution board.
f rotate the internal panel 45°.
f Pull the internal panel off with both hands.
f remove the filter.
f Carefully vacuum the filter.
f replace filter if severely dirty or damaged.
replace the filter after one year at the latest.
f Install the filter.
f Fit the internal panel.
f rotate the internal panel 45°.
Never operate the unit without filters.
f record the filter change in the following table:
Date of filter change
Next filter change
24 |
Quantity per pack-
Part num-
ing unit
ber
201455
Filter type
Cleaning the enclosure
f wipe the internal panel with a soft dry cloth.
Appliance with humidity sensor : Cleaning the humidity
sensor
f Pull off the internal panel.
f Visually check whether the humidity sensor is dirty.
f If the humidity sensor is dirty, switch off the power sup-
ply to the appliance via the fuse/MCB in the distribution
board.
f Clean the humidity sensor with a cotton bud moistened
with water.
f Fit the internal panel.
f switch on the power supply via the fuse/MCB in the distri-
bution board.
6. Troubleshooting
Problem
Cause
The fan is too loud.
The filter is dirty.
The fan of appliances
The control unit does
equipped with a humidity
not have a standard
sensor in the control unit
value for the humidi-
starts automatically the
ty sensor.
first time it has power.
If you cannot remedy the fault, contact your qualified contrac-
tor.
Remedy
Change the filter.
No action required. The
fan will switch off again
automatically. The fan is
working as intended.
LA 60 Trend | LA 60 Plus
Werbung
