Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Ambient Conditions
• The optimum ambient temperature is between 10° C
and +45° C. Lower operating temperatures may
cause internal and external damage to the battery.
Storage temperatures below freezing point should
be avoided. Keep away from direct insulation
(particularly in cars) and heaters. The relative
humidity must not exceed 50 % with an ambient
temperature of 45° C.
• This device must only be operated in an altitude
between -20 and 2000 m over NN.
• Never use the device during thunderstorms. Over
voltage
could
destroy
disconnect the device during thunderstorms.
• This device must never be operated or stockpiled
in surroundings where splash water, rain, moisture
or fog may harm the device. Moisture or very high
humidity can reduce the insulation and lead to
mortal electrical shocks.
• When using smoke machines, make sure that the
device is never exposed to the direct smoke jet and
is installed in a distance of 0.5 meters between
smoke machine and device.
Installation
• Do not shake the device. Avoid brute force when
installing or operating the device. When choosing
the installation spot, please make sure that the
device is not exposed to extreme heat, moisture or
dust. There should not be any cables lying around.
You endanger your own and the safety of others!
• Please note that speaker systems could move due
to
bass
beats
and
unintended pushes from DJs, musicians or the
audience present further risk. This is why the
speaker system must always be secured against
moving or the respective area has to be blocked.
Setup
• Operate the device only after having familiarized
with its functions. Do not permit operation by
persons not qualified for operating the device. Most
damages
are
the
operation!
• During the operation, please make sure that the
loudspeakers always sound well. When distortions
can be heard, either the amplifier or the
loudspeakers are overloaded. Overloads can
quickly lead to amplifier or speaker damage. In
order to avoid damage, please reduce the volume
immediately when distortions can be heard. Always
check the sound pressure level with a meter in
order to keep to the threshold.
Commercial Use
• Operating an amplification system in public or
industrial areas, a series of safety instructions have
to be followed. The operator must therefore inform
himself on the current safety instructions and
consider them.
Cleaning and Service
• Disconnect from mains before cleaning! Never use
solvents or aggressive detergents in order to clean
the device! Rather use a soft and damp cloth.
• There are no serviceable parts inside the device
except for the fuse. Maintenance and service
operations are only to be carried out by authorized
dealers! Should you need any spare parts, please
use genuine parts.
the
device.
Always
vibrations.
Furthermore,
result
of
unprofessional
Transport
• Please use the original packaging if the device is to
be transported.
Serial Barcode
• Never remove the serial barcode from the device
as this would make the guarantee void.
Modifications and Guarantee
• Please consider that unauthorized modifications on
the speaker system are forbidden due to safety
reasons!
• If this device will be operated in any way different
to the one described in this manual, the product
may suffer damages and the guarantee becomes
void. Furthermore, any other operation may lead to
dangers like short-circuit, burns, electric shock, etc.
Batteries
• Never
damage
Damaging the casing of the rechargeable battery
might cause an explosion or a fire!
• Never short-circuit the contacts of the rechargeable
battery. Do not throw the rechargeable battery or
the product into fire. There is a danger of fire and
explosion!
• Charge the rechargeable battery regularly, even if
you are not using the product. If regularly
recharged, the battery retains its capacity and is
ready to for use for several years and thus
extremely robust and long-lived. It is normal that a
certain amount of heat is generated during
charging.
• Do not try to short-circuit, recharge, disassemble or
heat batteries (danger of explosion!). Remove the
batteries if the device is not used for a longer
period of time. Damaged/leaking batteries may
cause harm to your skin–use safety gloves.
Intended Use
The PA system PORTY-8A serves for mobile PA
applications and was designed for indoor use only.
The product is intended for use in the EU. The
wireless receiver operates at 863.1 MHz, which is
generally approved and thus license-free.
18 • EN
the
rechargeable
battery.
Werbung
