Cleaning Air/ Water Heat Exchanger - Disassemble Unit Cover - Pfannenberg PWS 7032-24V DC Serie Betriebsanleitung

GB
5.2

Cleaning air/ water heat exchanger - disassemble unit cover

Requirement
- Air/water heat exchanger has been de-energized
Procedure
▪ Remove the fastening screws.
▪ Tilt the unit cover forward.
 For units with display or operating unit: Disconnect the ground cable and connecting cables from the
display or operating unit (inside).
▪ Pull off unit cover.

The unit cover is removed.
785408504 Manual PWS 7032
Figure 17 – Unit cover removal
© Pfannenberg GmbH Page 21 / 26