Cleaning And Maintenance; Storage; Disposal; What If There Are Problems - Beurer FWM 50 Gebrauchsanleitung

6. Cleaning and maintenance

IMPORTANT
Before cleaning, always remove the mains part from the socket first.
Otherwise, there is a risk of damage.
Small marks on the foot warmer can be removed with a damp cloth and, if necessary, with a little liquid
detergent for delicate laundry.
IMPORTANT
• Please note that the foot warmer must not be washed, chemically cleaned, wrung out, tumble dried,
put through a mangle or ironed. Failure to observe this may result in damage to the foot warmer.
The removable lining is machine washable at 30°.
Use a delicate laundry detergent and measure it out according to the manufacturer's instructions.
IMPORTANT
• Only use the foot warmer again once the foot warmer and lining have fully dried. Otherwise, there
is a risk of damage.

7. Storage

If you do not plan to use the foot warmer for a long period of time, we recommend that you store it in the
original packaging.
IMPORTANT
Please allow the foot warmer to cool down before storing. Failure to observe this may result in damage
to the foot warmer. To avoid damaging the foot warmer, do not place any objects on top of it whilst
storing.

8. Disposal

Dispose of the device in accordance with EC Directive – WEEE (Waste Electrical and Electronic
Equipment). If you have any questions, please contact the local authorities responsible for waste
disposal.

9. What if there are problems?

Problem
The foot warmer does not warm up or the massage
function cannot be activated while:
– the mains part is connected to a working socket.
– the mains part cable is connected to the connector
socket on the foot warmer.
– both functions (heat + massage) are switched on.

10. Technical data

See the rating label on the foot warmer.
Cause
The foot warmer is
faulty.
12
Solution
Send the foot
warmer for servicing.