Solamagic IR05026 Montage- Und Gebrauchsanleitung Seite 133

Step 3: Mounting the heater in the installation space
• Connect the device to the electricity, but do not switch on.
• Position the device in the ceiling cut-out.
Warning:
The connecting cable must be led away directly from the device. It must
be routed in the installation space away from the cut-out area.
• From the outside screw the installation frame to the ceiling panel using six
4 mm diameter screws.
Warning:
Ensure the screw joint is secure and permanent.
If necessary, use additional mounting frames (accessories)!
a
b
133