Installation In The Car - Lionelo Bastiaan i-Size Bedienungsanleitung

INSTALLATION IN THE CAR

Seat installation
- Installation with ISOFIX
and Top Tether belt
- Child fastened with seat
belts
Put the seat in the
semi-reclining position
(position "1").
- Installation with ISOFIX
and Top Tether belt
- Child fastened with seat
belts
Adjust the seat to one of
the 4 available positions
(see: Seat tilt adjustment).
- Installation with ISOFIX
and seat belts - Installation
with seat belts alone
Adjust the seat to one of
the 4 available positions
(see: Seat tilt adjustment).
REAR-FACING (40 – 105 CM)
1.
Place the seat on the car's bench seat in the space provided for installation.
2.
Push in the ISOFIX sliding lever and extend the ISOFIX arms (fig. 2). Anchor the ISOFIX
arms to the attachments located in the car's bench seat. The arms will interlock and
you will hear a characteristic click (fig. 3). If necessary, use the plastic guides included
in the set to make installation easier (fig. 4).
3.
Press the seat rotation button (13, fig. B), then move the seat to the rear-facing position
EN
Seat Seat position
orientation
Rear-facing
Forward
facing
Forward
facing
‑ 12 ‑
Child's
dimensions
From 40 to
105 cm
Child's weight:
maximum
21 kg
From 76 to
105 cm
Child's weight:
maximum
21 kg
From 100 to
150 cm