Assembly; Trimmer Guard; Fitting The Loop Handle; Fitting The Plant Guard - Husqvarna 136LiL Bedienungsanweisung

Trimmer guard

• Slide the trimmer guard into the trimmer head.
(Figure 35)
• Fasten the trimmer guard onto the housing to the
trimmerhead. (Figure 36)

Fitting the loop handle

• Fit the screw into the loop handle.
• Slide the loop handle into the fitting on the shaft.
• Tighten the screw that secures the loop handle.
(Figure 37)
• Now adjust the trimmer to give a comfortable working
position. (Figure 11)

Fitting the plant guard

• Install plant protection in the holes on the trimmer
head. (Figure 33)
14 – English

ASSEMBLY