Operation
HEALTH AIRFLOW Operation
TIMER
FAN MODE
and outlet grills of the air conditioner are opened, and
the unit goes on working under the condition before the
grille will close automatically.
Notice:
Do not adjust the outlet grille by hand. Otherwise, the
grille will run incorrectly. If the grille does not move correctly,
stop for a minute and then start, adjusting by remote
controller.
Remote controller can memorize each operation status.
when starting it next time, just press ON/OFF button and
unit will run in previous status.
Note:
2. In heating, it is better to select the
3. In cooling, it is better to select the
4. In cooling and dry, using the air conditioner for a
long time under the high air humidity, a phenomenon
falling drips of water occurs at the outlet grille.
5. Select the appropriate fan direction according to the
actual conditions.
5
6
Press once to
activate the
function
appears on the display. Avoid
the body.
again,
appears on the display.
direct to the body.
Press again
to deactivate
function
mode.
mode.
FAN MODE Operation
FAN
MODE
TIMER
Fan mode: default low fan speed,fan
mode , the setting temperature will
not display, the temperature of indoor
display is 24℃
FAN MODE