INVENTOR DR2VI32-09WFI/DR2VO32-09 Benutzerhandbuch Seite 11

Operation
HEALTH Operation
The Ionizer generates ions in
the air, and helps provide better
air quality by killing bacteria and
speeding up the dust sediment
in the room.
FAN MODE
Pressing the HEALTH button
once,
remote controller and the
ionizer operation starts
Pressing the HEALTH button again will
deactivate the ionizer operation.
When indoor fan motor is running, it has healthy
process function. (It's available under any mode)
When the fan in the indoor unit does not work, the
health lamp lights up, but the anion generator does
not release anion.
Press HEALTH
button
is displayed on the
ON/OFF operation and test operation
ON/OFF Operation:
Use this operation only when the remote controller is
defective or lost. For the Emergency Operation, use only
for a limited time.
When the emergency operation switch is pressed,
a sound is heard once, which means the start of this
operation.
emergency operation starts, the unit will run automatically in
the following modes:
Room Designated Timer
temperature temperature mode speed
Above 24 ºC 24 ºC No
Below 24 ºC 24 ºC No
It is impossible to change the settings of temp. and fan
speed, It is also not possible to operate in timer or dry mode.
Test operation:
est operation switch is the same as emergency switch.
T
Use this switch in the test operation
when the room temperature is below
16 ºC, do not use it in the normal
operation.
Continue to press the test operation
switch for more than 5 seconds.
After you hear a beep sound twice,
Loading of the battery
1
Remove the battery cover;
2
Load the batteries as illustrated. 2 R-03 batteries,
resetting key (cylinder); Be sure that the loading is
in line with the "+"/"-";
3
Load the battery, then put on the cover again.
Fan Operation
mode
AUTO COOL
AUTO HEAT
9