Basic Menu Operations (Main Menu, Setup Menu) - JVC DT-V1710CG/E Bedienungsanleitung

BASIC MENU OPERATIONS
(MAIN MENU, SETUP MENU)
ABOUT MENU SCREENS
This monitor features a MAIN MENU (main menu screen) and a SETUP MENU (setup menu screen).
The MAIN MENU contains the functions normally used, and the SETUP MENU contains the settings required for initial setup.
"MAIN MENU"
Items
1 APERTURE CONTROL
2 SLOT CONDITION
3 sub menu POSITION
4 AREA MARKER
5 COLOR MATRIX
About "Displays" *1 : Not displayed when an RGB signal is input.
*2 : Displayed only when the screen ratio is 16:9. Not displayed when an RGB signal is input.
When some items are not displayed depending on the input signals, subsequent items will move up.
Position of the menu varies depending on the type of signal.
"SETUP MENU"
Items
1 FUNCTION SETTING
2 PICTURE SUB ADJ.
3 COLOR TEMP./BAL.
4 SIZE/POSI. ADJ.
5 DISTORTION ADJ.
6 STATUS DISPLAY
7 CONTROL LOCK
8 all reset
BUTTONS FOR MENU OPERATIONS
Functions
Compensates the frequency characteristics of the input video signal.
Displays the status of the input cards installed in each of the input card slots.
Selects the display position of the sub menu superimposed on the screen.
Controls ON/OFF and other settings of the MARKER, SAFETY MARKER,
and ZOOM functions included in the AREA MARKER function.
Selects or adjusts the picture colour matrix.
Functions
Selects the control systems for the COLOR SYSTEM, synchronized signal, RUSH DELAY TIME,
tally lamp colours, and MAKE/TRIGGER terminal.
* Checks the amount of time that the monitor has been used.
* Sets the AUTO INPUT function ON/OFF. (When an input card compliant with AUTO INPUT is
installed.)
* Selects the audio channel group for the EMBEDDED AUDIO. (When an input card compliant
with EMBEDDED AUDIO is installed.)
Controls the approximate adjustment of the video control level when the video adjustment knob is
adjusted to the centre.
* Can also be used to switch the NTSC set-up level, and change the component signal's input level settings.
Sets or adjusts the colour temperature or white balance.
Adjusts the size or position of the picture.
Compensates the picture distortion.
Sets the status display ON/OFF.
* Switches the display on and off. Also selects the type of display. (When an input card compliant with AUDIO LEVEL METER
is installed.)
* Switches the AUDIO PLL setting. (When SDI input card compliant with EMBEDDED AUDIO is installed.)
Sets the control lock preventing the monitor from misuse.
Sets all items in SETUP MENU to factory-preset values.
UNDER PULSE COLOR
MUTING DEGAUSS SCAN CROSS OFF POWER
SLOT 1 SLOT 2 SLOT 3
A B C D E F
VOLUME MENU SCREENS ASPECT AREA INPUT SELECT
CHECK MARKER
DEGAUSS
MUTING
MENU
MENU
VOLUME
Displays
*1
*2
*1
13