KULZER Technovit Blue LED Bedienungsanleitung Seite 2

User Instructions - Technovit
Caution! Optical radiation - Never
look unprotected into the LED radiation!
Read carefully before first use! These Instructions are made to acquaint you with the handling of the Blue light device as well
as the polymerization system. Preserve these user instructions!
Area of application and product properties
The Technovit Blue LED is a mobile LED polymerization device for application (polymerization) of lightcuring Technovit‐
Products, especially in the areas of ambulant metallographic and repair of ceramic surfaces. The housing is made of anodized
aluminum. Light source is a 1‐Watt high‐performance LED with a continuous power control in a wavelength of 465 nm (Blue
light).
Not intended use:
Not usable for illuminating
•
Not for use in combination with medical or cosmetic products and applications
•
Safety advice:
Use only for application, described in the User Instructions. Using for other applications may cause damages on
the product or in its environment.
Do not use or store within reach of children ‐ Unit is not a toy!
•
Never look with unprotected eyes into the LED beam. Wearing of toned glasses (not part of the delivery unit) is
•
recommended
Do not look over a longer period onto the irradiated area
•
Never train the beam to the face of other people.
•
If someone trains the LED beam to your eyes, close the eyes and turn away your head.
•
Work in a bright environment.
•
Do not use the device, if outer damages are visible
•
Use only under dry conditions and in dry environment
•
Protect the device from wetness and extreme heat, never put into liquids!
•
Do not open the device, except on the backside for changing the batteries.
•
Reconstruction or changes affecting the product safety. Risk injury!
•
Never do repairs on your own!
•
Handle with care! Product can be easily damaged by crushes, beats or falling down from a minor height
•
Starting operations:
Before first use, put in the provided batteries (ref. to chapter „Changing of Batteries")
•
By pushing the button on the backside of the device, the LED is switched on and off.
•
By moving the head of the lamp, the irradiation area can be enhanced or reduced.
•
Application:
The mobile LED polymerization device Technovit Blue LED is made exclusively for polymerization of light curing materials for
industrial/metallographical use. It is matched for using in combination with the products of the
Technovit series 22xx and 25xx.
The ready to use Technovit‐products are applied with a brush, instrument or directly out of the syringe on the treated
•
(grinded/cleaned) surface. Objects to be fixed are hold with a tweezer.
Place the Technovit Blue LED in a distance of max. 1 cm over the placed Technovit products and switch on. Depending on
•
the product, the polymerization time takes 40 ‐ 60 sec. Keep the light cone as small as possible to avoid radiation losses.
For time measuring, use a separate timer (not part of the delivery unit)
•
After finishing the polymerization step, switch off the Technovit Blue LED.
•
Blue LED
Further treatment of the polymerized Technovit has to be done according the kind of its application
•
Technovit 2200 Technovit 2210
Polymerization Time 40 s 40 s
Max. Curing Layer 7 mm 5 mm
For larger curing depths work in several layers!
Maintenance, Cleaning:
The Technovit Blue LED is maintenance free! Keep the device clean and dry. To avoid radiation losses, clean the lens regularly.
Use a soft, wet cloth. Do not use aggressive cleaners. Keep the device in the provided pouch.
Changing of Batteries:
Open the cap at the backside of the device by turning counter clockwise.
•
Remove empty batteries and put in 2 new batteries of the same type (AA, LR6) with positive terminal ahead into the
•
housing. Rechargeable batteries are not permitted, because of different electrical values.
Close the cap by turning clockwise.
•
Attention! Use only faultless batteries. Leaked or damaged batteries can cause burns by contact with skin.
•
In order to avoid this, wear protective gloves.
Disposal:
Do not dispose the device in the household garbage. Dispose over recycling collecting points.
•
Do not dispose batteries in the household garbage. Dispose over recycling collecting points.
•
Batteries do not belong into children's hands!
•
Batteries have not to be shorted out, reloaded or thrown into fire ‐ Explosion hazard!
•
Technical data:
Voltage supply: 2 AA‐battery (1,5 V each), LR6 (alkaline)
•
LED‐Voltage / LED‐Power: ca. 3,3 V / 350 mA
•
Light output / Wave length: ca. 300 mW / 460 nm, + ‐20 nm
•
LED lifetime: approx. 1000 h
•
Dimensions housing / Weight: Ø 26 x 170 mm / ca. 70g
•
Operating temperature range: +10 °C ‐ + 35 °C
•
Temperature range for storage and transport: ‐10 °C ‐ + 40 °C
•
Humidity: 35 – 95 % rel. humidity (no condensation)
•
Barometric pressure: 500 – 1060 hPa
•
Warranty:
Warranty is 2 years from the date of purchasing by appropriate using of the product. Excluded are ware parts like batteries!
Reconstruction and changing as well as repairs without authority will cause expiration of the warranty!
In case of property or personnel injury, caused through incorrect handling or not adhering of these user instructions, we don't
take over any liability! In such cases the warranty expires against the manufacturer. We take no liability for consequential loss.
Manufacturer and contact:
Kulzer GmbH, Philipp‐Reis‐Straße 8/13, D‐61273 Wehrheim
Phone: +49 (0) 6181/9689 2574 or 2571, Fax:+49 (0) 6181/9689 2964
Email: technik.wehrheim@kulzer‐dental.com, Web: www.kulzer‐technik.com
User instructions Technovit Blue LED – Version NENA ‐ Stand: 07.2017 ‐ Subject to technical changes and errors!
Technovit 2220 Technovit 25xx
60 s 40 s
7 mm 1,5 mm