Translation Of Original Declaration Of Incorporation - Schunk Elb Montage- Und Betriebsanleitung

in terms of the Directive 2006/42/EG, Annex II, Part 1 Section B.
Manufacturer/
Distributor
We hereby declare that the partly completed machine described below
Product designation:
meets the following basic occupational health and safety of the Machinery Directive 2006/42/
EC:
No. 1.1.1, No. 1.1.2, No. 1.1.3, No. 1.1.5, No. 1.3.2, No. 1.5.1, No. 1.5.2; No. 1.5.4, No. 1.5.6,
No. 1.5.8, No. 1.5.10, No. 1.5.11, No. 1.5.13
The partly completed machinery may not be put into operation until it has been confirmed
that the machine into which the partly completed machinery is to be installed complies with
the provisions of the Machinery Directive (2006/42/EC). The declaration shall be rendered
invalid if modifications are made to the product.
Applied harmonized standards, especially:
EN ISO 12100:2010
EN 60204-1: 2018
EN 61000-6-2: 2019
EN IEC 61800-3:2018
The special technical documentation according to Annex VII, Part B, belonging to the partly
completed machine, has been created.
Person authorized to compile the technical documentation:
Markus Ganter, Address: see manufacturer's address
St. Georgen, August 2023
09.00 | ELB | Assembly and Operating Manual | de en | GAS 376437
10 Translation of original declaration of
incorporation
SCHUNK Electronic Solutions GmbH
Am Tannwald 17
D-78112 St. Georgen
Linear motor axis / ELB / electric
Safety of machinery - General principles for design -
Risk assessment and risk reduction
Safety of machines – Electrical equipment of machines, Part 1:
General requirements
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards -
Immunity for industrial environments (IEC 61000-6-2:2016)
Adjustable speed electrical power drive systems - Part 3:
EMC requirements and specific test methods (IEC 61800-3:2017)

Translation of original declaration of incorporation

p.p. Matthias Heilmann; Head of Development
101