Electrical Safety - Qiagen TissueLyser III Kurzanleitung

Electrical safety

WARNING
To ensure satisfactory and safe operation of the TissueLyser III, follow the advice below:
The line power cord must be connected to a line power outlet that has a protective

conductor (earth/ground).
Do not adjust or replace internal parts of the TissueLyser III.

Do not operate the TissueLyser III with any covers or parts removed.

If liquid has spilled inside the TissueLyser III, switch off the TissueLyser III, disconnect it

from the power outlet, and contact QIAGEN Technical Services.
TissueLyser III Safety Instructions and Quick Start Guide
Electrical hazard
Any interruption of the protective conductor (earth/ground lead)
inside or outside the TissueLyser III or disconnection of the protective
conductor terminal is likely to make the TissueLyser III dangerous.
Intentional interruption is prohibited.
Take note of the values for voltage and frequency on the TissueLyser
III type plate and only connect the TissueLyser III to a fitting power
grid.
Only connect the TissueLyser III to the power grid with the enclosed
power cable and to a power outlet with protective conductor
(earth/ground).
Before each usage, check the power cord and the plug for damage.
Never use the instrument with damaged power cord or plug.
Lethal voltages inside the TissueLyser III.
When the TissueLyser III is connected to line power, terminals may
be live and opening the TissueLyser III or removing parts is likely to
expose live parts.
Install the instrument in a way that allows easy access to the power
cord connector and the power switch.
05/2023 7